|
Heat-shrinkable tubing is universally applied for the insulation of connections or for the end-handling of electric wire, for the insulation of soldered points on resistors and capacitors, for the identification and encapsulation of electric wire, for the corrosion-proofing of metallic rods or tubes and for the protection of antennas. Heat-shrinkable tubes are used for the corrosion-proof and waterproof connection of fibre optic cable.
Halogen-free, flexible, flame-retardant heat-shrinkable tubing. Free of Pb,Cd, Hg,Cr+6, PBB and PBDE. Can be used in any enclosed area where a flame-retardant, halogen-free environment is required, such as the uderground, skyscraper, mass transit vehicles and ships. UL recognized at 600V. F mark.
Tekniske detaljer:
- Farve: green/yellow
- Længde: 1,2m
- Bore as supplied min.: 4.8mm
- Shrink temperature: 90°C
- Temperature range : 125°C
- Radial shrinking ratio: >50%
- Longitudinal change: <5%
- Tensile strength: >10.4 MPa
- Ultimate elongation: >200 %
- Aging in circulating-air oven: 158.0±1.0°C, 168hrs
- Tensile strength: >7.3MPa
- After aging:
- Ultimate elongation: >100%
- Volume resistivity: >1014 Ohm.cm
- Dielektrisk styrke: >15 KV/mm
- Flammability: VW-1
- Concentricity: >65%
|