|
The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.
Features:
- Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
- Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
- Extend fiber distance up to 2km
- Easy-to-view LED indicators provide status to monitor network activity easily
- External power supply
Specifications:
- Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Ports:
- 1 x 100M SC port
- 1 x 100M RJ45 port (Auto MDI/MDIX)
- Wave Length: 1310nm
- Network Media 10BASE-T:
- UTP category 3, 4, 5 cable (maximum 100m)
- EIA/TIA-568 100? STP (maximum 100m)
- Network Media 100BASE-T:
- UTP category 5, 5e cable (maximum 100m)
- EIA/TIA-568 100? STP (maximum 100m)
- Network Media 100BASE-FX: Multi-mode Fiber
- LED Indicators: PWR, FDX/Col, Link/Act, SPD
- Power supply: External power supply
- Safety & Emission: FCC, CE, RoHS
- Environment:
- Operationel temperatur: 0 til 40°C
- Storage Temperature: -40 til 70°C
- Operationel luftfugtighed: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
- Dimensions (WxDxH): 94 x 73 x 27mm
|