|
Dual-band, 802.11ac Wave 2 access point with a 2+ Gbps aggregate throughput rate that can be plugged into any non-AC wall outlet.
The Access Point In-wall HD is a dual-band, 802.11ac WiFi access point that can be plugged into any non-AC wall outlet. The UAP IW HD can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows it to support over 200 concurrently connected clients. This access point is powered by 802.3af PoE* and is equipped with 5x GbE RJ45 ports, including one for configurable 48V PoE passthrough. The UAP IW HD is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
- 200+ concurrent client capacity
- Powered by 802.3af PoE*
- 5x GbE RJ45 ports, including 1x for configurable PoE passthrough (Port 1)
Specifications:
- Mechanical:
- Dimensions: 139.7 x 86.7 x 25.75 mm
- Weight: 210 g
- Networking Interface: 5x 10/100/1000 Ethernet Ports
- Buttons: Reset
- Power Methods:
- Supported voltage range: 44-57Vdc
- Power Supply: UniFi Switch (PoE)
- PoE Out: 48V Passthrough (Pins +1, 2; -3, 6)
- Power Save: Supported
- Beamforming: Supported
- Maximum Power Consumption with PoE Passthrough:
- 11W
- 23W (Requires 802.3at PoE+)
- TX Power
- 2.4 GHz: 23 dBm
- 5 GHz: 26 dBm
- Dual-Band Antennas: 2x Single-Port, Single-Polarity Dual-Band Antennas, 2.4 GHz: 1.8 dBi Each, 5 GHz: 3.4 dBi Each
- Single-Band Antennas: 2x Single-Port, Dual-Polarity, Single-Band Antennas, 5 GHz: 6 dBi Each
- Wi-Fi Standards: 802.11 a/b/g/n/r/k/v/ac/ac-wave2
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
- BSSID: Up to 8 per Radio
- Mounting: 1-Gang Electrical Wall Box (Not Included)
- Operating temperature: -10...60°C
- Operating humidity: 5-95% (noncondensing)
- Advanced Traffic Management:
- VLAN: 802.1Q
- Advanced QoS: Per-User Rate Limiting
- Guest Traffic Isolation: Supported
- WMM: Voice, Video, Best Effort, and Background
- Concurrent Clients: 200+
- Supported Data Rates (Mbps):
- 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- 802.11ac:
- 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
- 58 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 160)
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
* 802.3at PoE+ required for PoE passthrough
|