|
2,8'' TFT Touch Shield til Arduino UNO R3 og Mega2560. Farve TFT display med touchskærm samt SD kort sokkel.
Tekniske detaljer:
- Arduino UNO Rev3 Shield kompatibel footprint
- Arduino library UTFT understøttet (se downloads)
- Skærmopløsning: 240 x 320 pixels
- Skærmstørrelse: 2,8"
- Farver: 262K
- LCD driver chip: HX8347i (understøttet af 8347D)
- 4-leder resistiv touchskærm
- Backlight: 4 hvide LED
- SPFD5408 controller med indbygget video RAM buffer
- 8 bit digital interface, plus 4 kontrollinjer
- 5V kompatibel, brug med 3,3V eller 5V logik
- Onboard 3,3V / 300mA LDO regulator
- Størrelse: 82 x 52 x 7mm
Interface defintion:
1: LCD_RST: LCD bus reset signal
2: LCD_CS: LCD bus chip select signal
3: LCD_RS: LCD bus command/data selection signal
4: LCD_WR: LCD bus write signal
5: LCD_RD: LCD bus read signal
6: GND: power ground
7: 5V: 5V power input
8: 3V3: NC this pin can not be connected
9: LCD_D0: LCD 8-bit data Bit0
10: LCD_D1: LCD 8-bit data Bit1
11: LCD_D2: LCD 8-bit data Bit2
12: LCD_D3: LCD 8-bit data Bit3
13: LCD_D4: LCD 8-bit data Bit4
14: LCD_D5: LCD 8-bit data Bit5
15: LCD_D6: LCD 8-bit data Bit6
16: LCD_D7: LCD 8-bit data Bit7
17: SD_SS: SD card SPI bus chip selection signal
18: SD_DI: SD card SPI bus MOSI signal
19: SD_DO: SD card SPI bus MISO signal
20: SD_SCK: SD card SPI bus clock signal |