|
This digital multimeter is the perfect tool for professional electricians and installers. Thanks to its compact and robust design, you can take it anywhere. The very complete multimeter is suitable for measuring voltage, current and resistance using the supplied test leads.
The meter has a True RMS function, which ensures accurate voltage and current measurements. With the included temperature probes, you can easily perform accurate temperature tests with a measurement range of -20°C to 1000°C. Furthermore, the meter features a MIN/MAX and REL function.
The meter has a backlit 2000 count display, making readings easy to read, and a torch for dark rooms. With a safety category of CAT III - 1000 V / CAT IV - 600 V and a current measurement of 500 mA and 10 A at 1000 V, you can be sure of safe use.
Features:
- Built-in data hold function: This function allows you to easily hold and read measured values even after disconnecting the measurement leads. This ensures accurate and reliable measurements.
- Non-contact voltage detection: The NCV function allows you to detect the presence of voltage at a safe distance, without making direct contact with the cables.
- REL function: The initial value at the start of the measurement is stored as the reference value (= zero). The difference between the subsequent readings and the reference value is shown on the display.
- Temperature measurement: With the included temperature probes, you can easily perform accurate temperature tests with a measurement range from -20°C to 1000°C. A handy feature that not all multimeters have.
- Backlight: A large backlit display ensures good readability even in poor lighting conditions.
Specifications:
- Physical properties:
- Cable length: 1m
- Display type: LCD
- Backlight: Yes
- Maximum digits display: 2000
- Electrical data:
- Continuity test: Yes
- AC current: Basic accuracy:±(1.5%+5)
- AC voltage: Basic accuracy:±(1.0%+5)
- Audible continuity measurement: Yes
- Automatic polarity indication: Yes
- Capacity: Basic accuracy:±(4.0%+15)
- DC current: Basic accuracy:±(1.0%+5)
- DC voltage: Basic accuracy:±(0.5%+3)
- Diode test: Yes
- Frequency: Basic accuracy:±(0.1%+2)
- Fuse type: F 0.50 A / 1000 V, 6,35 x 32 mm, F 10 A / 1000 V, 6.35 x 32 mm
- Out of range indication: Yes
- Transistor test: No
- True rms: Yes
- AC current measurements: 0.1 µA - 10 A
- AC voltage measurements: 0.1 mV-750 V
- Capacity measurements: 10 pF - 100 mF
- DC current measurements: 0.1 µA - 10 A
- DC voltage measurements: 0.1 mV-1000 V
- Frequency measurements: 10 Hz - 10 MHz
- Resistance measurements: 0.1 ohm - 200 megohm
- Resistance specifications: Basic accuracy:±(0.8%+5)
- Technical data:
- Safety rating: Cat III / 1000 V, Cat IV / 600 V
- Automatic power-off function: Yes
- Data-hold function: Yes
- Relative value measurement: Yes
- Remote voltage test: Yes
- Environmental data:
- IP rating: IPx0
- Usage location: Indoor only
- Operational properties:
- Measuring temperature range °C: -20-1000 °C
- Measuring temperature range °F: -4-1832 °F
- Range setting: Manual
- Power supply:
- Batteries included: Yes
- Number of batteries: 1
- Low battery indicator: Yes
- Battery IEC size: 9 V
- Included:
- Silicone sleeve
- Pouch
- TLM80 Test lead set (1m)
- TP80 temperature probe (0,7m)
- Product basic info:
- Colour unit: Red
- Dimensions (D x H x W): 60 x 200 x 92mm
- Weight unit: 320 g
- Material: ABS
|