|
The T5-1000 Electrical Tester is a versatile troubleshooting tool to carry to every job site. Use it to check voltage, continuity, and current–all with one compact tool. Measure current up to 100A without breaking the circuit with OpenJaw™ design. Just select volts, ohms, or current and the tester does the rest. The electrical tester auto-selects between AC and DC voltage up to 1000V.
The OpenJaw™ design allows for fast and easy current measurements without needing to make metallic contact, just slide a wire into the open fork. The continuity beeper offers a quick go/no-go tests, resistance measurements to 1000?.
The electrical tester comes with detachable Slim Reach probe tips so you can easily work in tight spaces. Or hand free work when you use the test lead holder to make the meter an “extended handle” for the probe.
An integrated protection circuit allows the tester to stay connected to a voltage source longer than a solenoid tester. The T5-1000 Electrical Tester also boasts a CAT III 1000V, CAT IV 600V rating.
Features:
- Automatically measures volts AC and volts DC with accurate digital resolution
- Displays resistance p? up to 1000Ohm
- Easy and accurate OpenJaw current measurement
- Review beeper
- Compact design with practical probe storage
- Sufficiently robust to withstand a three meter drop
- The removable SlimReach™ probe tips conform to national electrical standards
- Test beak can be used with the test leads
- Available in 600 and 1000 volt models
- Can remain connected for much longer than solenoid type testers
- Automatic cut-off function to extend battery life
- The extra holster can be attached to a belt and has room for test leads
Specifications:
- Jaw opening: 12.9 mm (0.5 in)
- Max wire size: 1/0 THHN Cable
- Connections: 4mm banana plugs
- Current range AC rms: 0 to 100.0 A
- Accuracy AC current (50/60 Hz): 3% ± 3 counts
- AC response: Averaging
- Voltage range AC/DC: 0 to 1000 V
- Voltage accuracy:
- AC: 1.5% ± 2 counts
- DC: 1% ± 1 count
- Continuity beeper threshold: On at < 25 ?, off at > 400 ?
- Volts indicator LED threshold: Guaranteed on by 30 V AC
- Operating temperature: -10°C to 50°C
- Storage temperature: -30°C to 60°C
- Humidity (without condensation):
- 0% to 95% (5°C to 30°C)
- 0% to 75% (30°C to 40°C)
- 0% to 45% (40°C to 50°C)
- Dust/water resistance: Yes
- Operating altitude: 2000 meters max
- Temperature coefficient: 0.1 x (specified accuracy)/°C (< 18°C or> 28°C)
- Measurement Category: IEC 61010-2-032, IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A ac
Agency approvals CSA, TUV
- Maximum voltage: 1000 V between any terminal and earth ground
- Size: 30.5 x 51 x 203 mm
- Weight: 300 g
- Battery type: 2 x AA
- Low battery indicator: Yes
- Current sensor opening: 12.9 mm
|