|
T56 is the new Xgecu Pro version which supports a wider chip range, larger capacity and faster speed.The software interface is clear, smooth and easy to use. more functions. easy to upgrade software. Ultra-high cost performance, suitable for small batch programming below 5000, also suitable for developers and professional maintenance personnel.
Features:
- Support chip model: 24/25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, FLASH memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc.
- Support package: DIP42, PLCC44, SOP44, FP44, TSOP48, TSOP56, BGA48, BGA63, BGA64, BGA100, BGA153, BGA162, BGA169, BGA221 on the basis of TL866II
- NAND EMMC supports maximum capacity up to 256G
- Support Logic IC Testing
- Support VGA_HDMI ISP and VGA Tools
- Compared with the general 48-pin universal programmer, the 56-pin full drive has 8 more universal IO ports. The advantage of the 56 universal drives is that the all chips below 56 pins only need one adapter in the same package. Example: A general TSOP56 adapter, which can program all of TSOP56, TSOP48, TSOP40, TSOP32 on the T56 programmer. one TSOP56 adapter is equivalent to the function of five adapters of the ordinary 48-pin universal programmer.
- For high-capacity chips, the T56 programmer meets or exceeds the speed of most specialized programmers
- An excellent programmer. If the main controller of the programmer can work at a higher speed, its stability and speed determined by the highest operating frequency supported by the pins. The higher frequency, the better of anti-interference ability.,more stronger and more reliable.
- The T56 pin tested with the frequency is as high as 70MHZ. The pin operating frequency is more than 3 times that of many similar programmers. This is the main reason why the T56 can work reliably at a very high speed for large-capacity high-speed chips.
- On the other hand, it can also be said that the speed of the programmer is also a manifestation of the reliability of the programmer.
- T56 almost reaches the limit speed of USB2.0 (HS 480MHZ) transmission when reading EMMC large-capacity chip.
Specifications:
- Programmer parameters:
- 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB2.0 HS 480MHZ transmission
- 56 pin full drive IO design. All pins have a maximum operating frequency of 50MHZ and high reliability.
- Stable and reliable 8Pins in-circuit programming interface, the wire Lehgth is more than 30CM,and it can communicate reliably at 25MHZ.
- 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ
- VCC voltage 1.2-6.5V 64 levels adjustable, VPP voltage 6.5-25V 64 levels adjustable
- IO communication signal voltage continuously adjustable 1.2V-3.6V
- VCC 120MA-320MA overcurrent protection continuously adjustable
- VPP 120MA overcurrent protection
- Power supply:
- 5V <500MA. All chips do not need external power supply
- Can be connected to an external power supply 5V-5.5V 500MA for multiple programming
- Multiple protections for the external power supply: overvoltage protection / reverse connection protection / overcurrent protection / low voltage prompt
- Write EMMC Speed: 12MB/s-25MB/s
- Reading EMMC speed: 14MB/s-45MB/s is 2-5 times faster than similar programmers
|